Lifescan Diabetes Monitoring System manual Unit of Measure, Decimal Separator

Unit of Measure

The meter is set to display test results in milligrams per deciliter (mg/dL). You have the option to change to millimoles per liter (mmol/L).

To change the unit of measure, enter the set-up mode (see page 37). Use the M button to choose the Unit of Measure option. Press the C button to change the unit of measure. You may now press the M button to review or change any of the options you have chosen or press the on/off button to turn the meter off.

Decimal Separator

Note: The Decimal Separator option appears only if you have selected mmol/L as your unit of measure.

The meter is set to display mil- limoles per liter (mmol/L) using a decimal point. This option allows you to select a comma instead of a decimal point as a decimal separator.

44