Lifescan Diabetes Monitoring System manual Clean the Test Area, Do not USE

Step 3: Clean the Test Area.

CAUTION: Do not get water inside the meter. Do not immerse meter in water.

The following cleaning agents will damage the meter.

DO NOT USE:

■Alcohol

■Cleansers with ammonia or phenol

■Glass cleaners

■Abrasive cleansers

M C

Check the clear, protective coating over the test area to make sure it is not scratched or damaged.

Rub the test area with a cotton swab or soft cloth dampened with water to remove all blood, dirt, or lint from the test area. If necessary, a mild liquid dishwashing detergent mixed with water may also be used. Do not apply full-strength detergent to the test area. Be careful not to scratch the test area. Dry the test area with a soft, dry tissue or cloth. Remove any lint.

M C

62