MESSAGE | PROBLEM | WHAT TO DO |
|
|
|
clean test area
1.There is dirt, blood, or lint on the test area.
2.Your hand or an object covered the test area while the meter was turned on.
1.Clean the test area and test strip holder according to instructions.
2.Repeat the test. Keep the meter’s test area clear.
3.The meter was used in very bright light.
3.Move the meter away from the light source. Repeat the test with a new test strip.
remove strip
The test strip was inserted before the word insert appeared on the display.
Repeat the test with a new test strip. Wait for the word insert before inserting a test strip.
52
