MAINTENANCE |
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
GUN HANDLE DISASSEMBLY
The internal parts of the gun handle may be inspected or serviced if necessary.
The gun handle consists of two halves that are held together with a collar on each end. To open up the handle, turn the collars approximately 60 degrees counterclockwise (the same direction as removing a right hand thread) until the collar reaches a stop. Then pull the collar off the gun handle. If the collars are difficult to turn, position the gun handle against a corner, place a screw- driver against the tab on the collar and give the screwdriver a sharp blow to turn the collar past an internal locking rib.
Counterclockwise
TABLE D.2
ACCESSORIES AND EXPENDABLE REPLACEMENT PARTS
FOR MAGNUM 250L GUN AND CABLE ASSEMBLIES
|
|
| English | Metric |
Description | Part No. |
| Size | Size |
CABLE LINER |
|
|
|
|
For 15' (4.5 m) or |
| .025 | 0.6 – 0.8 mm | |
shorter Cable |
| .035 | 0.9 – 1.2 mm | |
|
| 3/64" | 1.2 mm | |
|
|
| (Alum. wire) | (Alum. wire) |
|
|
|
|
|
CONTACT TIPS |
|
|
|
|
Standard Duty | .025" | 0.6 mm | ||
| .030" | 0.8 mm | ||
| .035" | 0.9 mm | ||
| .045" | 1.2 mm | ||
Heavy Duty | .035" | 0.9 mm | ||
| .045" | 1.2 mm | ||
Tapered | .025" | 0.6 mm | ||
| .030" | 0.8 mm | ||
| .035" | 0.9 mm | ||
| .045" | 1.2 mm | ||
Tab (For Aluminum) | 3/64" | 1.2 mm | ||
|
|
| (Alum. Wire) | (Alum. Wire) |
|
|
|
|
|
GAS NOZZLES |
|
|
|
|
Fixed (Flush) |
| 3/8" | 9.5 mm | |
| * | 1/2" | 12.7 mm | |
|
| 5/8" | 15.9 mm | |
Fi (Recessed) |
| 3/8" | 9.5 mm | |
|
| 1/2" | 12.7 mm | |
|
| 5/8" | 15.9 mm | |
Requires: Gas |
|
|
|
|
Diffuser As'bly | * | .025 | 0.6 – 1.2 mm | |
Adjustable |
| 1/2" | 12.7 mm | |
|
| 5/8" | 15.9 mm | |
Requires: |
|
|
|
|
Nozzle Insulator |
|
|
| |
As’bly |
|
|
|
|
Requires: |
|
|
|
|
Gas Diffuser |
| .025 | 0.6 – 0.8 mm | |
As’bly |
| .035 | 0.9 – 1.2 mm | |
Gasless Nozzle | ∆ |
|
| |
(For Innershield) |
|
|
|
|
|
|
|
|
|
GUN TUBE ASSEMBLIES |
|
|
|
|
Standard (60°) | * |
|
| |
45° |
|
|
| |
|
|
|
|
|
*Included with POWER MIG® 215
∆ Requires
