Lincoln Electric SVM192-A Recommended Equipment, Plasma Cutting, Stick, K1580-1- Pro-Cut, K1816-1

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

C-3	ACCESSORIES		C-3
RECOMMENDED EQUIPMENT		PLASMA CUTTING:
STICK		K1580-1-Pro-Cut 55	(Requires full KVA Adapter
		K1816-1).

K704 Accessory Kit - For Stick Welding. Includes 35 ft (10.7m).

•2/0 AWG electrode cable, 30 ft. (9.1m)

•2/0 AWG work cable with lugs, headshield, filter plate, work clamp, and electrode holder. 400 amp capacity.

K875 Accessory Kit - For stick welding. Includes 20 Ft. (6.1m). #6 electrode cable with lug, 15 Ft. (4.6m) #6 work cable with lugs, headshield, filter plate, work clamp, and electrode holder and sample pack of mild steel electrode. 150 amp capacity.

WIRE FEED

K449 LN-25 - Includes internal contactor for across the arc operation (no control cable). Provides “cold” elec- trode until gun trigger is pressed. Includes gas sole- noid.

K1870-1 LN-15 Across the Arc

Magnum Gun and Magnum Gun Connector Kit are required for gas-shielded welding. Innershield Gun is required for gasless welding.

K126-2Magnum 350 Innershield Gun (for LN-25, LN- 15).

K1802-1Magnum 300 MIG Gun (for LN-25, includes Connector Kit).

K470-2Magnum 300 MIG Gun (for LN-15, requires K466-10 Magnum Gun Connector Kit).

K1500-1Gun Receiver Bushing (for LN-15, K126-2)

Note: See Wire Feeder IM Manual for appropriate

Drive Roll & Guide Tube Kits.

TIG WELDING

K1783-9-PTA-26V TIG Torch.

KP509- Magnum Parts Kit and Argon gas.

K930-2-TIG Module.

Required TIG Equipment:

K938-1 Connector Kit

K936-4 Control Cable

K814 Arc Start Switch

Optional TIG Equipment:

K939-1 Docking Kit

K937-45 Control Cable Extension

K844-1 Water Valve Kit

EAGLE™ 10,000