TOC
TOC
TROUBLESHOOTING & REPAIR
OUTPUT FILTER BOARD
REMOVAL AND REPLACEMENT (continued)
Return to Section
Return to Master
FIGURE F.34 OUTPUT FILTER BOARD
-
CN1 
CN2
Return to Section TOC
Section TOC
Return to Master TOC
Master TOC
+
Nut Positive
Output
Terminal
18.Reconnect lead CN7 previously removed from the control/display board assembly.
19.Replace the large nut previously removed from around the positive output terminal.
20.Replace the two output filter board mounting screws previously removed.
21.Reconnect plugs CN1 and CN2 previously removed from the output filter board.
22.Reconnect all heavy leads previously removed.
23.Replace casefront.
24.Replace all casefront mounting screws.
25.Replace the four nameplate/keypad mounting screws previously removed.
26.Replace the case wraparound cover.
Return
