Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
TROUBLESHOOTING & REPAIR
BUS BOARD TEST (continued)
FIGURE F.11 BUS BOARD LOCATION
BUS BOARD
Return to Section TOC
Return to Master TOC
TEST PROCEDURE
1.Remove input power to the
2.Using a phillips head screwdriver, remove the case wraparound cover.
3.Perform the Capacitor Discharge Procedure detailed earlier in this section.
4.Locate the Bus board and associated plugs . Do not remove plugs from the board. See Figure F.11.
5.Carefully apply the correct input voltage to the
6.Machine should be set to “STICK” mode.
Return to Section TOC
Return to Master TOC
