Lincoln Electric V205-T Safety Instructions, General Description, Welding Capability, Limitations

B-2 OPERATION B-2

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

Read and understand this entire section before operating your machine.

SAFETY INSTRUCTIONS

WARNING

ELECTRIC SHOCK can kill.

•Do not touch electrically live parts such as output terminals, electrode or internal wiring.

•Insulate yourself from the work and ground.

•Always wear dry insulating gloves.

____________________________________

FUMES AND GASES can be dangerous.

• Keep your head out of fumes.

•Use ventilation or exhaust to remove fumes from breathing zone.

____________________________________

WELDING, CUTTING and

GOUGING SPARKS

can cause fire or explosion

•Keep flammable material away.

•Do not weld, cut or gouge on containers that have held com-

bustibles.

____________________________________

ARC RAYS can burn.

•Wear eye, ear and body protection.

____________________________________

Only qualified personnel should operate this equipment. Observe all safety information throughout this manual.

GENERAL DESCRIPTION

The Invertec V205-T AC/DC is an industrial 200 amp arc welding power source which utilizes single phase input power, to produce constant current output. The welding response of this Invertec has been optimized for stick (SMAW) and TIG (GTAW). The unit is ideal for industrial applications where portability is important.

The Invertec V205-T AC/DC is a power source that can perform the following types of welding with excellent results:

TIG (with high frequency or Touch Start Tig Starting).

•TIG AC with square, sinusoidal and triangular wave- forms

•Tig DC

The following items can be connected to the 6 pin socket on the front panel:

•Remote control potentiometer for Stick welding.

•Remote Foot Amptrol or Hand Amptrol

•Arc Start Switch

NOTE: See Accessories section of this manual for product numbers and complete description.

WELDING CAPABILITY

The Invertec V205-T AC/DC is rated at 200 amps, 18 volts, at 40% duty cycle on a ten minute basis. It is capable of higher duty cycles at lower output currents. It is capable of 140 amps, 15.6 volts at at 100% duty cycle. If the duty cycle is exceeded, a thermal protec- tor will shut off the output until the machine cools. See Technical Specifications in A-1 for other rated outputs.

The Invertec V205-T is recommended for stick welding with such popular electrodes as Fleetweld 35, Fleetweld 37, Fleetweld 180 and Excalibur 7018.

LIMITATIONS

The V205-T is not recommended for pipe thawing.

V205-T AC/DC