Lindy Carbon Monoxide Alarm user manual Fuses Double -pole fuse / fuse of the neutral wire, Supply

3IINSTALLATIONNSTALLATIONAND COMMISSIONINGAND COMMISSIONING

3.3.2Fuses Double -pole fuse / fuse of the neutral wire

			Fire risk.
		Caution!	Only replace fuses with fuses
			of the same type (250 V, 1 A,
			slow-acting, high switching
			• Switch off the device and unplug the
			mains plug.
			• Remove the fuse plug and replace
		Danger!	the fuse.
			The device is supplied from
			several power sources.
			• The device may only be
			opened by trained personnel.
			To disconnect the device from
			the voltage supply before
			opening:
			• Disconnect the mains plug.
			• Disconnect the MAINS
			MONITORING inputs.
			• Open the cover of the device.
			• Replace the fuse and close the device again.
	Fuse for the auxiliary voltage		Only replace fuse F1 on the +12 V auxiliary voltage supply (marked in
	supply		the device) with a fuse of the same type (250 V, 400 mA, fast-acting, 5
3.4			x 20 mm, UL-listed).
	COMMISSIONING		• Check that the RMS and the connected components are correctly
			cabled (> 3.3.1).
	Mains Socket		The mains socket is on the rear of the device.
			• Use only the supplied power cable.
			After connection, wait for the
		RMS ready	message in the LCD display.
			• Input the network parameters via
			Telnet, the COM interface (> 4.4)
			or by hand via the keys (> 4.3).

If function problems should arise: (> 5)

All functions and displays indicated in the manual depend on the version of the operating software.The latest version is available on the Internet (> 1.4).

Rack