Lindy Carbon Monoxide Alarm 4.5.2, MonitoringRack MonitoringSystemSystem, 4OOPERATIONPERATION

4OOPERATIONPERATION

4.5.2	LOG SERVICE
	Specify receivers of log messages
	in the network which support the
	standardised syslog service
	(UNIXServer).
	Two types of messages can be
	logged via the syslog service:
	– Filter results similar to the
	displays under [M] Message Log	[M] MESSAGE LOG
	in the main menu (> 4.10).	Switch on/off display of filter messages.
	– Debug messages in the event of	[A] ADD A NEW DESTINATION
		Add the IP address of a computer to receive log data.
	error analysis (please contact	[D] DELETE A DESTINATION
	technical support).
		Delete a computer from the list.
		[?] HELP
		Explanation of the menu items.
		[Q] QUIT WITHOUT SAVING	25
		Jump back to the “Network Configuration” menu without saving
		changes.
		[RETURN] QUIT WITH SAVING
		Jump back to the “Network Configuration” menu and save changes.
4.6	SYSYTEM CONFIGURATION UPDATE
	Reference to sub-menus are mar-
	ked with “>”.

[C]CONFIGURATION VIA TFTP

Save and load device configuration on other computers via TFTP (>4.6.1)

[U]UPDATE VIA TFTP

Update system software via TFTP (>4.6.2).

[E]ERASE CONFIGURATION

Reset all settings to the standard settings.

[R] Reboot

Warm restart of the device, session is interrupted.

[?] Help

Explanation of the menu items.

[Q]QUIT WITHOUT SAVING

Jump back to the main menu without saving changes.

[RETURN] QUIT WITH SAVING

Jump back to the main menu and save changes.

MonitoringRack MonitoringSystemSystem