Lindy Carbon Monoxide Alarm Door Contact, Reader, Infrared Room surveillance, Cable, Water Sensor

2

TTECHNICALECHNICALDESCRIPTIONDESCRIPTION

Door Contact			Monitors access using a magnetic bridge
			sensor which responds to
			any magnetic material (no contact
			required).
			– Also for monitoring side panels
			or cover
			– Cable length: 4 m
			– Maximum cable length: 20 m
			– With mounting hardware
	Chipcard	reader	The chipcard reader is integrated in
			the door frame of the server cabinet.
			– It reads chipcards.
			– It controls an electrical door
			opener using DIGITAL OUT 4 if the
			card is valid.
			– It is connected to the AUX serial
			interface.
	Infrared	room surveillance	Detects movements in the
			surveillance area.
			– Adjustable sensitivity
			– Sabotage protection
			– Cable length: 4 m
			– Maximum cable length: 20 m
			– With mounting hardware
	Extension	cable	– RJ11 cable for temperature or
			humidity sensors
			Length: 5 m; 10 m; 15 m; 20 m
			– 4-core sensor cable (for all other
			sensors)
			Length: 5 m; 10 m; 15 m; 20 m
	Water	sensor	Watersensor to detect
			floods / water

Mains	Power Strips	Switchable mains power strips can be managed
		by the RMS
		– by RS-232 (IP versions
		also available)
		– 4 out / 1 in (19" 1U)
		– 8 out / 2 in (redundant
		power supply support)
	Note	Other sensors can be connected to DIGITAL IN, ALERT IN or UPS IN
		according to the requirements in 3.3.1.

Rack