Update the screen | Lindy Carbon Monoxide Alarm specification

4

4.8.6

OOPERATIONPERATION

CONNECT EXTERNAL DEVICES Devices with a serial interface (for example chipcard reader, UPS, etc.) VIA SERIAL INTERFACE (AUX) can be connected to the AUX port on the rear of the RMS.

Software version 1.4 can support a chipcard reader to implement an access control system.

[U]UPDATE SCREEN

Update the screen..

[D]AUX DEVICE SELECTION

Select a different device.

[L]LOGIC

Set the logic for the door opener contact.

make The contact is made if successful (default status open) break The contact is broken if successful (default status closed)

[T]OPEN TIME

Set the open time.

[O]OPEN DOOR MANUALLY

Open the door.

[?]HELP

Explanation of the menu points.

[Q]QUIT

Return to the previous menu.

Rack

Image 32

Lindy Carbon Monoxide Alarm user manual Update the screen

Contents

MonitoringRack MonitoringSystemSystem Rack Ccontentsontents Ccontentsontents General Information Safe Working Disposal WarrantyLapse of warranty Service HotlineMail STANDARDS, Regulations Rack Monitoring Lite Connection options DigitalHumidity Sensor digital Mains Power Strips Door ContactReader Infrared Room surveillance Necessary Tools PreparationsCheck the supplied items Installation and Commissioning Electrical Installation Connections and cablingCabling Mains montoring Digital AlertUPS 10BASET COM AUX Fuses Double -pole fuse / fuse of the neutral wire Fuse for the auxiliary voltageSupply Commissioning Operator Control Elements Initial State Operation VIA Keys on the Front of the Device Selecting a menu item Entering network parameters Filter messagesDisplay in the Confirm menu Operation VIA Telnet or Serial Interface COM ? Help Block diagram Network Configuration IP Address Snmp Configuration AMESnmp a Ccess Write Community Reboot Configuration VIA Tftp Update VIA TftpTFTP-SERVER Status User Administration Selection pointer to next user Configure digital outputs Digital Outputs Invert Quit Temperature InputsDigital Inputs Humidity Inputs Mains Monitoring Update the screen AUX Device Selection Previous Device+ Next Device Return Quit With Saving Filter Filter Selection UITSnmp Trap Ffect LED W Arning DIGITAL/ALERT/UPS Inputs Set threshold Selection pointer to next input TEMPERATURE/MAINS/HUMIDITY InputsODE-A B M ODE-B Ilter Feedback InputsPrevious Feedback Input Message LOG Preconfigured filters with an Example of filter configuration using filter 1 temperatureExamples of filter settings Example of terminal assign MonitoringRack MonitoringSystemSystem Rack Eexamplexample Configurationconfiguration Specimen output Configuration Rack Mmalfunctionsalfunctions Remedy Technicaltechnical Datadata Rated ambient temperature FAQ EMCMIB RFC Product designation Model System Configuration Documentation Explanation of the MIB For RMSIso.org.dod.internet.private.enterprises.infratec.rms Variable Type Value Objects under Variable Type Value Objects under Variable Type Value AccessObject under ups I NT Able Variable Type Value Access Objects under outputTable Variable Type Value Objects underObjects under tempTable Objects under humidTable Objects under Variable Objects under mainsTable Variable Type ValueObjects under filterTable Variable Type Value Variable Type Value Access 6.1.4.1.1909.10.7.3 Type Value Access FilterMainsTable Objects under icc Variable Type Value Objects under userTable Variable Type ValueObjects under aux Variable GNU General Public RemoRack RMS Lite RMS Advanced Rack