Lindy Carbon Monoxide Alarm 1.4 1.5, MonitoringRack MonitoringSystemSystem, Ppleaseleasenotenote

1

1.4

1.5

1

PPLEASELEASENOTENOTE

SERVICE	In the event of malfunction, please first follow the instructions in the
	relevant section (> 5). For all other questions, please do not hesitate to			7
	contact LINDY technical support.
HOTLINE	￿	DE:	0621 / 47 005 - 0
		UK:	01642 754040
		IT:	031 48 40 11
		FR:	0 825 825 111
		CH:	061 335 97 00
E-MAIL		USA:	(256) 771-0660
		Australia:	07 3262 9033

support@lindy.com

•To receive a speedy reply, please provide the following information:

– Device type

– Serial number

– Software version

– Configuration file

– Description of problem

•Please also leave your telephone number.

You will receive a qualified reply by e-mail or telephone.

STANDARDS, REGULATIONS	The LINDY RMS has been built and tested in accordance with the rele-
AND LICENCE	vant guidelines. In connection with installation in a terminal (for exam-
	ple, a rack), the additional requirements in accordance with IEC 950
	must be observed and complied with.
	The RMS conforms to the safety requirements of the EU Directive on
	electromagnetic compatibility (EMC) (89/33/EEC) and the low voltage
	Directive (73/23/EEC).
	Below is a list of the standards and regulations on which the RMS is
	based:
	EN 55 022/Class B
	EN 60 950 (IEC 950)
	EN 61 000-4-2
	EN 61 000-4-3

LICENCE	All LINUX source codes which were used to produce the product and
	are subject to the GPL (see GNU Public Licence ä A4 ) can be obtained
	for a service charge. This does not include the source codes of the RMS
	software itself. However, the LINUX sources are freely available, for
	example at URL: “http://metalab.unc.edu/pub/Linux”.

MonitoringRack MonitoringSystemSystem