Lindy P16-IP user manual On Screen Display Menu OSD Port Selection, Rom Reflash, Section

Section 3 KVM Switch Operation

3.3 On Screen Display Menu (OSD) Port Selection

The On Screen Display menu provides a lot of information about the P16-IP and the attached computers, and offers advanced administration features and full KVM Switch control to the user.

To invoke the On Screen Display Menu press the following hotkeys:

Scroll	+
Lock

Scroll	+
Lock

Space Bar

= On Screen Display Menu

The OSD menu closes down automatically after a specified time period, which can be set in the OSD settings menu. The time selected can be between 5 and 99 seconds

The OSD menu can be invoked even when the P16-IP is currently switched to a port with no connected or a non-powered on PC. In this case the resolution of OSD menu is fixed to a 1024 X 768 virtual frame.

If you wish to, you can restore the factory default values of the OSD. Please note this does not include resetting the password! The bank LED display on the front panel will flash during the memory refresh process.

Scroll

Lock

+

Scroll

Lock

+

R

=OSD setting back to factory default value (Note: Not including password)

ROM REFLASH

An OSD overlay window will be displayed on the screen during the memory refresh process

When the OSD values have been reset back to factory default, the bank LED on the front panel will stop flashing.

The OSD also allows you to give each attached computer its own name. A name search function is also available from the OSD:

Scroll

Lock

+

Scroll

Lock

+

F

=Search the same PC name

(Note: Search PC name starting from 1st PC port)

	You can type in one character up to a complete name. The
	upper part of the window will display all computer names
	that match one by one. You can use the UP/DOWN cursor
	keys to toggle through this name list.
F I N D : ￿
	Press ENTER to switch to the computer displayed in the
	upper window.
	ESC closes the window

16