Lindy P16-IP user manual Authentication, IP Auto Configuration

Section 4 IP Access Configuration & Operation

Authentication

To adjust the authentication settings, enter your login as a super user and change your password.

Super user login

Enter the login name of the super user. The initial value is super. All of the characters are lower case.

Super user password

Enter the current password for the super user. This initial value is pass. All of the characters are lower case.

New super user password

Enter the new password for the super user.

New password (confirm)

Re-type the new password for the super user.

To close the window and accept the changes, press the OK button, otherwise press the Cancel button.

IP Auto Configuration

With this option, you can specify whether the P16-IP should obtain its network settings from a DHCP or BOOTP server. From the drop down list select either DHCP or BOOTP. If you select NONE, the IP auto configuration is disabled and you should manually input the following network settings:

IP address

The IP address the P16-IP uses.

Net mask

The net mask of the connected IP subnet.

Gateway address

The IP address of the default router for the connected IP subnet. If you do not have a default router, enter 0.0.0.0.

22