Lindy P16-IP user manual Network, Force Composite Sync Required for Sun Computers

Section 4 IP Access Configuration & Operation

really changing (depending on the quality of the video input signal). All in all the default setting should be suitable for most situations.

Force Composite Sync (Required for Sun Computers)

To support signal transmission from a Sun machine, enable this option. If not enabled the picture of the remote console will not be visible. To set the options, click Apply.

4.7.5 Device Settings

Network

The Network Settings panel allows network related parameters to be changed. Each parameter will be explained below. Once applied the new network settings will immediately come into effect.

Note: The initial IP configuration is usually done directly at the host system using the special procedure described on Page 20.

Changing the network settings of the P16-IP might result in losing connection to it. In case you change the settings remotely make sure that all the values are correct and you still have an option to access the P16-IP.

53