Lindy P16-IP Section, IP Access Configuration & Operation, Enable Dynamic DNS, Dynamic DNS server

Models: P16-IP

1 77
Download 77 pages 10.92 Kb
Page 57
Image 57
Enable Dynamic DNS

Section 4

IP Access Configuration & Operation

 

 

 

 

 

 

 

 

 

 

Enable Dynamic DNS

Enables the Dynamic DNS service. This requires a configured DNS server IP address.

Dynamic DNS server

This is the server name where the P16-IP registers itself in regular intervals. At the time of writing, this is a fixed setting since only dyndns.org is currently supported.

Hostname

This is the hostname of the P16-IP that is provided by the Dynamic DNS Server. (Use the whole name including the domain, e.g. testserver.dyndns.org not just the actual hostname).

Username

You have registered this username during your manual registration with the Dynamic DNS Server. Spaces are not allowed in the nickname.

Password

The password used during manual registration with the Dynamic DNS Server.

Check time

The P16-IP registers itself in the Dynamic DNS server at this time.

Check interval

This is the interval for reporting again to the Dynamic DNS server by the P16-IP.

Note: The P16-IP has its own independent real time clock. Make sure the time setting of the P16-IP switch is correct. (See the Section called Date and Time on page 63)

56

Page 57
Image 57
Lindy P16-IP Section, IP Access Configuration & Operation, Enable Dynamic DNS, Dynamic DNS server, Hostname, Username