Omron CS1W-DRM21 Enabled before you set these values, Areas and Word Ranges, Code Name Word range

Allocated DM Area Words			Section 3-3
Note Make sure the CPU Unit is in PROGRAM mode and the master function is
	enabled before you set these values.
	Name	Range	Details
	OUT block 1 area	See Areas and	Specifies the OUT block area. The OUT
		Word Ranges.	block is not allocated when set to 00 Hex.
	First word in OUT		Specifies the first word for the OUT block.
	block 1
	IN block 1 area		Specifies the IN block area. The IN block
			is not allocated when set to 00 Hex.
	First word in IN		Specifies the first word for the IN block.
	block 1
	Allocation size		Specifies the area for the allocation size
	setup table area		setup table. An area is not allocated when
			set to 00 Hex.
	First word in the		Specifies the first word of the allocation
	allocation size		size setup table.
	setup table
	(See note.)
	Setting results	See Setting	Gives the setting results.
		Results.

Note See Allocation Size Setup Table (p. 84) for more details on the first word of the allocation size setup table.

Areas and Word Ranges

Code	Name	Word range
00 Hex	---	The block is not allocated.
01 Hex	CIO Area (CIO)	0000 to 17FF Hex (0 to 6143)
03 Hex	Data Memory (DM)	0000 to 7FFF Hex (0 to 32767)
04 Hex	Work Area (WR)	0000 to 01FF Hex (0 to 511)
05 Hex	Holding Relay (HR)	0000 to 01FF Hex (0 to 511)
08 to 14	Expansion Data Memory (EM)	0000 to 7FFF Hex (0 to 32767) for
Hex	Bank 0 to bank C (13 banks)	all banks

83