Omron CJ1W-DRM21 Various Connection, Methods, Maximum Network Length, 500 m, High-speed, Slaves

DeviceNet Unit Features		Section 1-2
	a DeviceNet Unit. (See Appendix D Memory Card Backup Function for more
	details.)
	CS/CJ-series DeviceNet Unit	Configurator
	CPU Unit
	Memory Card
	File save
	File load
	Loads setup data to a DeviceNet Unit using a
	software switch in CIO Area of the CPU Unit.
Note	Refer to 7-2 Memory Card Backup Functions for details.
Various Connection	Normal multi-drop, T-branch multi-drop (with up to three branches), and daisy-
Methods	chain line connections are available. These methods can be combined to con-
	struct a flexible system that suits the floor layout.
Maximum Network Length	A network can connect up to 63 Slaves and can handle remote I/O communi-
of 500 m	cations of up to 2,000 byes (16,000 points without the Configurator) per
	DeviceNet Unit. A maximum network length of 500 m is possible with a baud
	rate of125 Kbps using thick cable.
High-speed	High-speed communications are possible at up to 500 Kbps for a trunk line
Communications	length of 100 m.
Compatibility with Slow	The communications cycle time can be set even without the Configurator so
Slaves	slaves with slow response times can be used.
A Wide Variety of Slaves	A wide variety of I/O devices, like Remote I/O Terminals, Environment-resis-
	tant Terminals, Remote Adapters, Sensor Terminals, Temperature Input Ter-
	minals, CQM1 I/O Link Units, Analog I/O Terminals, C200H I/O Link Units,
	RS-232C Units, MULTIPLE I/O TERMINALs, Temperature Adjusters, Invert-
	ers, and Intelligent Plugs can be used as slaves.

20