Omron CS1W-DRM21, CJ1W-DRM21 operation manual Communications Cycle Time Reference Table, Ranges

Allocated DM Area WordsSection 3-3

3-3-5 Communications Cycle Time Reference Table

This table can be used to access the present, maximum and minimum com- munications cycle times. All the values in this table are cleared from the Unit and the maximum and minimum values are updated with new values when the Communications Cycle Time Reference Table Clear Switch (word n, bit 13) is turned ON.

	Word	Bit 15		Bit 00
	m+15	Communications cycle time setting value (ms)
	m+16	Communications cycle time present value (ms)
	m+17	Communications cycle time maximum value (ms)
	m+18	Communications cycle time minimum value (ms)
Ranges
	Name		Range	Details
	Communications cycle time set-		0000 to	Provide the communications cycle
	ting value (ms)		01F4 Hex (0	time setting as well as the present,
			to 500)	maximum, and minimum commu-
				nications cycle time in millisec-
	Communications cycle time		0000 to
				onds. The default settings is
	present value (ms)		FFFF Hex
				0000Hex (0).
			(0 to 65535)
	Communications cycle time maxi-
	mum value (ms)
	Communications cycle time mini-
	mum value (ms)

3-3-6 Master User-set Allocations Reference Table

The settings (area and size) for a maximum of four blocks (OUT block 1, OUT block 2, IN block 1, and IN block 2) can be accessed in the master user-set allocations reference table.

The OUT 1 and IN 1 areas and sizes are valid even if a Configurator is not being used.

Word	Bit 15	Bit 08 Bit 07		Bit 00
m+19	Reserved by system		OUT block 1 area
m+20		First word in OUT block 1
m+21		No. of bytes in OUT block 1
m+22	Reserved by system		IN block 1 area
m+23		First word in IN block 1
m+24		No. of bytes in IN block 1
m+25	Reserved by system		OUT block 2 area
m+26		First word in OUT block 2
m+27		No. of bytes in OUT block 2
m+28	Reserved by system		IN block 2 area
m+29		First word in IN block 2
m+30		No. of bytes in IN block 2

87