Omron CJ1W-DRM21 Allocation Size Setup Table, Setting Results, Code Description Details

Allocated DM Area Words			Section 3-3
Setting Results
	Code	Description	Details
	0000	Completed normally	---
	Hex
	1101	No area	• Incorrect area setting.
	Hex		• The allocated size in the allocation size setup
			table is 0.
	1103	Address range specifi-	The first word is outside the setting range.
	Hex	cation error
	110C	Parameter error	• The OUT or IN size in the allocation size setup
	Hex		table exceeds 200 bytes.
			• Both the OUT and IN blocks are set for no allo-
			cations.
			• No slaves are allocated.
	1104	Address range over-	• The block or the allocation size setup table ex-
	Hex	flow	ceeds the valid word range.
			• The block is larger than 1,000 bytes.
	2201	Wrong operating	The CPU Unit is not in PROGRAM mode.
	Hex	mode
	2201	Unit busy	Service cannot be executed because the Unit is
	Hex		busy.
	2606	Cannot execute ser-	The Unit master communications have not been
	Hex	vice	disabled.

3-3-3 Allocation Size Setup Table

The following allocation size setup tables must be set in the I/O memory in the

CPU Unit to use the Master User Allocations Setup Table.

The number of bytes set in the allocation size setup table are allocated in word units in order of node addresses for OUT block 1 and then IN block 1. Set the sizes within a range from 0 to 200 bytes (100 words).

Word Bit 15	Bit 08 Bit 07	Bit 00
I	Node address 0 OUT size (bytes)	Node address 0 IN size (bytes)
I+1	Node address 1 OUT size (bytes)	Node address 1 IN size (bytes)
	:
	:

I+63

Node address 63 OUT size (bytes)

Node address 63 IN size (bytes)

84