Linear PERS-4200 Series manual Internet Protocol IP Reporting

Public Switched Telephone Network (PSTN) Reporting

Settings for dial-up reporting using the telephone network are set in this area.

Account Number

The account number can be up to 10 digits long. The last four digits of the account number will be used as the communicator’s account number for 4x2 and CID format reports to the monitoring service.

✲IMPORTANT! THE ACCOUNT NUMBER FIELD IS REQUIRED.

•SurGard System III - compatible SIA requires a 10-digit number

•PSTN/SIA requires a 6-digit number

•PSTN/CID and 4 by 2 requires a 4-digit number.

Enter the account number for the specifi c Console.

Reporting Format

Three Central Station PSTN reporting formats are available.

•Contact ID (CID)

•SIA

•4 by 2

Contact ID is the default format. Select one of the other formats as required by the Central Station.

Dialing Format

The default dialing format is DTMF tone dialing. If the telephone system that the Console will be connected to does not support DTMF tone dialing, select pulse dialing.

Dialing Tones Audible

By default dialing tones do not sound from the Console’s speaker. This option is typically used for troubleshooting telephone issues.

Check this option box to have the Console speaker active during dialing.

Primary Telephone Number

The primary telephone number is the number that will be dialed fi rst in the dialing sequence. The number can be up to 20 digits including commas that each add a one second pause.

✲IMPORTANT!THE PRIMARYTELEPHONE NUMBER FIELD IS REQUIRED.

Secondary Telephone Number

The secondary telephone number is the number that will be dialed second in the dialing sequence if the primary number is unsuccessful. The number can be up to 20 digits including commas that each add a one second pause.

Split Reporting

The Console can report supervisory events to a supervisory telephone number if split reporting is enabled. Split reporting is disabled by default.

When split reporting is enabled, reports for alarm events, reminder message timeouts, activity window expirations, and 2-way audio calls are made to the primary and secondary phone numbers.

Reports of home/away mode, Console trouble conditions, sensor trouble conditions, and Automatic Status reports are made separately to the supervisory phone number only.

Supervisory Telephone Number

The supervisory telephone number is the number that will be dialed to report supervisory events if split reporting is enabled. The number can be up to 20 digits including commas that each add a one second pause.

Internet Protocol (IP) Reporting

The PERS-4200 Console can be configured to communicate over-the-air (OTA) using the optional add-on Model UMTS-3G Cellular Module. The Module supports over-the-air data reporting for the PERS Console using 3G and voice communications through the carrier’s cellular telephone network.

The settings for IP reporting using the cellular module are set in this area.

IP Account Number

The FIBRO IP reporting protocol allows up to 10 digits in the account number. PERS truncates the left-most digits of the account number to fi t the reporting format used. The cellular module adds left-most zeroes as necessary for IP reporting. Enter the account number used for SurGard IP reporting for the specifi c Console.

DNIS / Line #

DNIS is used by the Central station to help identify accounts. This allows there to be multiple panels sending SIA/Contact ID events using account 1234 for example. The DNIS may be transmitted to the automation software/printer to ID account 1234 as belonging to dealer X (DNIS 00001) and the other account 1234 as belong to dealer Y (DNIS of

00002). If it is not used it should be sent as all 0’s and it will not allow the SIA/Contact ID account numbers to be extended.

FIBRO Heartbeat

Enter the time (in seconds) required by the Central Station receiver for the FIBRO heartbeat. Default is 7200 seconds.

Linear Voice Gateway Management Timer

Enter the time (in minutes) for the periodic management connection to the voice gateway, used for over-the-air confi guration update and fi rmware download.

SIM ID

Displays the Subscriber Identity Module ID being used in the cellular module.

Central Station IP Address

The area is for entering the Central Station’s primary and secondary IP address’, local port, and remote port numbers for the server that will be receiving alarm reports from the Console. Enter the values required by the server.

Voice Gateway

The area is for entering the Central Station’s voice gateway IP address for the Linear Voice Gateway that will be handling voice-over-IP (VOIP) communications from the Console during 2-way audio mode. Refer to the Linear Voice Gateway instructions and settings for details.

IP Reporting Format

Three Central Station IP reporting formats are available.

•Surgard System III-compatible SIA

•Surgard System III-compatible CID18 Extended

•Surgard System III-compatible CID58 Extended

SURGARD SYSTEM III-COMPATIBLE CID18 EXTENDED is the default format. Select one of the other formats if required by the Central Station.

Cellular Network ID

Used to connect to a specifi c network. This specifi es the numeric network identifi er, which is made from the Mobile Country Code (MCC) and Mobile Network Code (MNC).

IP Service

The cellular service data network name string. For example: wap.cingular or m2m.com.attz.

LEMI Ports

This area displays the name and fi rmware revision number of any option modules connected to the Console.

20