| Instant Broadband Series |
Full/Col | Green. The Full/Col LED also serves two purposes. If this |
| LED is continuously illuminated, a connection is being suc- |
| cessfully maintained through the LAN port. If the LED is |
| flickering, the connection is experiencing collisions. |
| Infrequent collisions are normal. If this LED is flickering |
| too often, there may be a problem with your connection. |
| Check the Troubleshooting section on page 30 if you think |
| there is a problem. |
10/100 | Orange. The 10/100 LED illuminates when a successful |
| 100Mbps connection is made through the corresponding |
| port. If a 10Mbps connection is being made, the light will |
| not be illuminated. |
The WAN Indicators | |
Link | Green. The Link LED illuminates when a successful con- |
| nection is made between the Router and your Broadband |
| device or network. |
Act | Green. The Act LED flickers when the Router is sending or |
| receiving data over the broadband port. |
Diag | Red. The Diag LED illuminates when the Router goes |
| through its |
| off upon successful completion of the diagnosis. If this |
| LED stays on for an abnormally long period of time, refer |
| to Troubleshooting on page 30. |
8
