Linksys SPA 900 manual Linksys Key System Parameters, Ext Ip

Models: SPA 900

1 165
Download 165 pages 13.37 Kb
Page 122
Image 122

Chapter 5 Linksys IP Phone Field Reference

 

SIP Tab

 

 

 

 

Field

Description

 

 

 

STUN Enable

Enables the use of STUN to discover NAT mapping. Select yes or no from the drop-down

 

menu.

 

Defaults to no.

 

 

 

STUN Test Enable

If the STUN Enable feature is enabled and a valid STUN server is available, the Linksys

 

IP phone can perform a NAT-type discovery operation when it powers on. It contacts the

 

configured STUN server, and the result of the discovery is reported in a Warning header

 

in all subsequent REGISTER requests. If the Linksys IP phone detects symmetric NAT or

 

a symmetric firewall, NAT mapping is disabled.

 

Defaults to no.

 

 

 

STUN Server

IP address or fully-qualified domain name of the STUN server to contact for NAT

 

mapping discovery.

 

 

 

EXT IP

External IP address to substitute for the actual IP address of the Linksys IP phone in all

 

outgoing SIP messages. If 0.0.0.0 is specified, no IP address substitution is performed.

 

If this parameter is specified, the Linksys IP phone assumes this IP address when

 

generating SIP messages and SDP (if NAT Mapping is enabled for that line). However,

 

the results of STUN and VIA received parameter processing, if available, supersede this

 

statically configured value.

 

Defaults to blank.

 

 

 

EXT RTP Port Min

External port mapping number of the RTP Port Min. number. If this value is not zero, the

 

RTP port number in all outgoing SIP messages is substituted for the corresponding port

 

value in the external RTP port range.

 

Defaults to blank.

 

 

 

NAT Keep Alive Intvl

Interval between NAT-mapping keep alive messages.

 

Defaults to 15.

 

 

 

Linksys Key System Parameters

Field

Description

 

 

Linksys Key System

Enable or disable the Linksys Key System on the IP phone.

 

Defaults to yes.

 

 

Multicast Address

The multicast address is used by the SPA9000 to communicate with the Linksys IP IP

 

phones.

 

Defaults to 224.168.168.168:6061.

 

 

Force LAN Codec

The choices are: none, G.711u, or G.711a. Defaults to none.

 

 

 

 

Linksys IP Phone Administrator Guide

 

 

 

 

 

 

Firmware Version 5.1

 

 

5-17

 

 

 

 

 

Page 122
Image 122
Linksys SPA 900 manual Linksys Key System Parameters, Ext Ip