![](/images/new-backgrounds/1295159/295159119x1.webp)
Chapter 3 Managing Linksys IP Phones
Configuring the Web Service
•Example 1: Normal Ring
•60(2/4)
•Number of Cadence Sections = 1
•Cadence Section 1: Section Length = 60 s
•Number of Segments = 1
•Segment 1: On=2s, Off=4s
•Total Ring Length = 60s
•Example 2: Distinctive Ring (short,short,short,long)
•60(.2/.2,.2/.2,.2/.2,1/4)
•Number of Cadence Sections = 1
•Cadence Section 1: Section Length = 60s
•Number of Segments = 4
•Segment 1: On=0.2s, Off=0.2s
•Segment 2: On=0.2s, Off=0.2s
•Segment 3: On=0.2s, Off=0.2s
•Segment 4: On=1.0s, Off=4.0s
•Total Ring Length=60s
•ToneScript – A
•FreqScript;Z1[;Z2]. The section Zi is similar to the Si section in a CadScript except that each on/off segment is followed by a frequency components parameter: Zi = Di(oni,1/offi,1/fi,1[,oni,2/offi,2/fi,2 [,oni,3/offi,3/fi,3 [,oni,4/offi,4/fi,4 [,oni,5/offi,5/fi,5 [,oni,6/offi,6/fi,6]]]]])
where fi,j = n1[+n2]+n3[+n4[+n5[+n6]]]]] and 1 < nk < 6 indicates which of the frequency components given in the FreqScript are used in that segment; if more than one frequency component is used in a segment, the components are summed together.
|
| Linksys IP Phone Administrator Guide |
|
| |
|
|
| |||
| Firmware Version 5.1 |
|
|
| |
|
|
|
|