Linksys SPA 900 manual Following is an example value

Chapter 3 Managing Linksys IP Phones

Localization

•Dictionary server script—This parameter is used to define the location of the dictionary server, the languages available and the associated dictionary. The syntax is as follows:

<Dictionary_Server_Script ua="na"> </Dictionary_Server_Script>

The default is blank and the maximum number of characters is 512. The detailed format is as follows:

serv={server ip port and root path}; d0=<language0>;x0=<dictionary0 filename>; d1=<language1>;x1=<dictionary1 filename>; d2=<language2>;x2=<dictionary2 filename>; d3=<language3>;x3=<dictionary3 filename>; d4=<language4>;x4=<dictionary4 filename>; d5=<language5>;x5=<dictionary5 filename>; d6=<language6>;x6=<dictionary6 filename>; d7=<language3>;x7=<dictionary7 filename>; d8=<language8>;x8=<dictionary8 filename>; d9=<language5>;x9=<dictionary9 filename>;

The following is an example value:

<Dictionary_Server_Script ua="na">

serv=tftp://192.168.1.119/;d0=English;x0=enS_v101.xml;d1=Spanish;x1=esS_v101.xml </Dictionary_Server_Script>

•Language Selection—This parameter is used to select the default language. Its value needs to match one of the languages supported by the dictionary server. The script (dx value) is as follows:

<Language_Selection ua="na"> </Language_Selection>

The default is blank and the maximum number of characters is 512. The following is an example:

<Language_Selection ua="na"> Spanish </Language_Selection>

These parameters can also be modified from the administration web server, on the Regional set- tings tab, as shown in Figure 3-3.

Figure 3-3 Dictionary Server Configuration Parameters

During startup, the phone checks the selected/preferred language and downloads the dictionary from the TFTP/HFTP provisioning server indicated in the device configuration. The dictionaries are available at the following website:

http://www.linksys-itsp.com

	Linksys IP Phone Administrator Guide
3-6	Firmware Version 5.1