Chapter 5 Linksys IP Phone Field Reference
Ext Tab
Dial Plan
Note The following parameters do not apply to the SPA901.
The default dial plan script for each line is as follows: (*xx[3469]11000[2-9]xxxxxx1xxx[2-9]xxxxxxxxxxxxxxxxxx.). The syntax for a dial plan expression is as follows:
Table 5-1 Dial Plan Script Syntax
Dial Plan Entry | Functionality |
| |
*xx | Allow arbitrary 2 digit star code |
| |
[3469]11 | Allow x11 sequences |
| |
0 | Operator |
| |
00 | International Operator |
| |
[2-9]xxxxxx | US local number |
| |
1xxx[2-9]xxxxxx | US 1 + 10-digit long distance number |
| |
xxxxxxxxxxxx. | Everything else (Int’l long distance, FWD, ...) |
| |
If IP dialing is enabled, one can dial [user-id@]a.b.c.d[:port], where ‘@’, ‘.’, and ‘:’ are dialed by entering *, user-id must be numeric (like a phone number) and a, b, c, d must be between 0 and 255, and port must be larger than 255. If port is not given, 5060 is used. Port and User-Id are optional. If the user-id portion matches a pattern in the dial plan, then it is interpreted as a regular phone number according to the dial plan. The INVITE message, however, is still sent to the outbound proxy if it is enabled.
| Linksys IP Phone Administrator Guide |
5-46 | Firmware Version 5.1 |
