Linksys SPA 900 System Administration, Reboot and Restart, Interdigit Short Timer, Dial Plans

Chapter 3 Managing Linksys IP Phones

System Administration

Interdigit Short Timer

ParName	Interdigit_Short_Timer
Default	3

The <Interdigit_Short_Timer> specifies the default maximum time (in seconds) allowed between dialed digits, when at least one candidate digit sequence is complete as dialed (see the following discussion of Dial_Plan parameters for an explanation of candidate digit sequences).

Dial Plans

ParName	Dial_Plan[n] for Each Line n
Default	(*xx [3469]11 0 00 <:1408>[2-9]xxxxxx
	1[2-9]xx[2-9]xxxxxx 011x. )

The Dial_Plan parameters contain the actual dial plan scripts for each line n, where n is a number from 1 to 4.

System Administration

This section describes features and operations required for administering and maintaining the basic function of the Linksys IP phone. It includes the following topics:

•Reboot and Restart, page 3-37

•Factory Reset, page 3-38

•Password Protection, page 3-38

•Managing the Time/Date, page 3-38

•Daylight Saving Time, page 3-38

•Using Star Codes to Activate/Deactivate Services, page 3-39

•Disabling Services, page 3-41

•Error and Log Reporting, page 3-42

Reboot and Restart

•Reboot cold boots the phone and restarts the phone’s DHCP client.

•Restart warm boots the phone, without restarting the phone’s DHCP client.

You must confirm the chosen option before continuing.

	Linksys IP Phone Administrator Guide
Firmware Version 5.1		3-37