Chapter 3 Managing Linksys IP Phones
System Administration
•Call Forward Busy (*90)—Call forwards on busy. Applies to primary extension only:
•Cancel Call Forward Busy (*91)—Cancels call forward on busy. Applies to primary extension only.
•Call Forward No Answer (*92)—Call forwards if no answer. Applies to primary extension only.
•Cancel Call Forward No Answer (*93)—Cancels call forward no answer. Applies to primary extension only.
•Block Caller ID Always (*67)—Blocks caller ID on all outbound calls. Applies to all extensions.
•Block Caller ID Per Call (*81)—Blocks caller ID on the next outbound call (on the current call appearance only).
•Unblock Caller ID Always (*68)—Unblocks caller ID on all outbound calls. Applies to all extensions.
•Unblock Caller ID Per Call (*82)—Unblocks caller ID on the next outbound call (on the current call appearance only).
•Secure All Calls (*16)—Defaults to prefer to use encrypted media (voice codecs).
•Secure No Calls (*17)—Defaults to prefer to use unencrypted media for all outbound calls. Applies to all extensions.
•Secure Next Call (*18)—Prefers to use encrypted media for the next outbound call (on this call appearance only).
•Do Not Secure Next Call (*19)—Prefers to use unencrypted media for the next outbound call (on this call appearance only).
•Do Not Disturb (*78)—Applies to all extensions.
•Cancel Do Not Disturb (*79)—Applies to all extensions.
•Block Anonymous Calls—Applies to all extensions.
•Cancel Block Anonymous Calls—Applies to all extensions.
•Blind Transfer (*98)—This allows you to transfer a call to another person without talking to that person:
a.Put the call on hold
b.Get a dial tone on another line
c.Call the person to whom you are transferring the call by pressing *98, followed by their extension
d.Hang up the receiver
•Prefer G.711u (*017110)—Sets preferred codec to G.711u for next outbound call.
•Prefer G.711a (*017111)—Sets preferred codec to G.711a for next outbound call.
•Prefer G.723 (*01723)—Sets preferred codec to G.723 for next outbound call.
•Prefer G.726r16 (*0172616)—Sets preferred codec to G.726r16 for next outbound call.
•Prefer G.726r24 (*0172624—Sets preferred codec to G.726r24 for next outbound call.
•Prefer G.726r32 (*0172632)—Sets preferred codec to G.726r32 for next outbound call.
•Prefer G.726r40 (*0172640)—Sets preferred codec to G.726r40 for next outbound call.
•Prefer G.729a (*01729)—Sets preferred codec to G.729a for next outbound call.
•Force G.711u (*027110)—Forces G.711u for next outbound call.
•Force G.711a (*027111)—Forces G.711a for next outbound call.
•Force G.723 (*02723)—Forces G.723 for next outbound call.
•Force G.726r16 (*0272616)—Forces G.726r16 for next outbound call.
| Linksys IP Phone Administrator Guide |
3-40 | Firmware Version 5.1 |
