Linksys SPA 900 manual SPA92x, SPA94x, and SPA962 Hardware Features, Front Panel and Side of Phone

Chapter 2 Getting Started

		Linksys 900 Series IP Phones
Front Panel and Side of Phone
	Feature	Function
	Message waiting light	On: you have a voicemail message.
	STATUS	Off: make a call. On: make a call; line is shared. Flashing: shared
		line on hold. On red: line in use. Flashing red: local call on hold. On
		orange: phone not registered.
	FLASH	Press to pickup a second incoming call, transfer a call, or setup a
		three-way conference call.
	REDIAL	Press the redial the last number called.
Back Panel
	Port	Function
	Phone jack	Connect to the handset.
	Ethernet port	Connect to the SPA9000 through a local switch.
	Power	Connect to the 5-volt power supply.

SPA92x, SPA94x, and SPA962 Hardware Features

The SPA941, SPA942, and SPA962 provide LCD displays and other additional hardware features, including the following:

•Four Illuminated Call Appearance Line Buttons with Tricolor LED's (six LED’s on the SPA962)

•LED Indicates Line State – Active, Idle, On-Hold, Unregistered

•Line LED Configurable to 13 Different States (See “Line Key LED Pattern” section on page 5-31).

•Dedicated Illuminated Buttons for:

•Audio Mute On/Off

•Headset On/Off

•Speakerphone On/Off

•Four Soft Key Buttons

•Four Way Rocking Directional Knob for Menu Navigation

•Voice Mail Message Waiting Indicator Light

•Voice Mail Message Retrieval Button

•Dedicated Hold Button

•Settings Button for Access to Feature, Set-up, and Configuration Menus

•Volume Control Rocking Up/Down Knob Controls Handset, Headset, Speaker, Ringer

•Standard 12-Button Dialing Pad

•High Quality Handset and Cradle

	Linksys IP Phone Administrator Guide
Firmware Version 5.1		2-3