Wireless-G Home Router

The Front Panel

The Router’s LEDs are located on the front panel.

Figure 3-2: The Router’s Front Panel

Power

Green. The Power LED lights up and will stay on while the Router is powered on. When the

 

Router goes through its self-diagnostic mode during every boot-up, this LED will flash. When

 

the diagnostic is complete, the LED will be solidly lit.

1, 2, 3, 4

Green. These numbered LEDs, corresponding with the numbered ports on the Router’s back

 

panel, serve two purposes. If the LED is continuously lit, the Router is successfully connected

 

to a device through that port. A flashing LED indicates network activity over that port.

Wireless

Green. The Wireless LED lights up whenever there is a successful wireless connection. If the

 

LED is flashing, the Router is actively sending or receiving data over the network.

Internet

Green. The Internet LED lights up when there is a connection made through the Internet port.

Chapter 3: Getting to Know the Wireless-G Home Router

NOTE: SecureEasySetup is a feature that makes it easy to set up your wireless network. If you have SecureEasySetup devices, run the Router’s Setup Wizard CD-ROM and follow the on-screen instructions to use SecureEasySetup.

7

The Front Panel

Page 14
Image 14
Linksys WRH54G manual Front Panel, Router’s LEDs are located on the front panel