Wireless-G Broadband Router with 2 Phone Ports
The Front Panel
The Router’s LEDs are located on the front panel.
| Figure |
Power | Green. The Power LED lights up and will stay on while the Router is powered on. When the |
| Router goes through its |
| the diagnostic is complete, the LED will be solidly lit. |
Ethernet | Green. These numbered LEDs, corresponding with the numbered ports on the Router’s back |
| panel, serve two purposes. If the LED is continuously lit, the Router is successfully connected |
| to a device through that port. A flashing LED indicates network activity over that port. |
Wireless | Green. The WLAN LED lights up whenever there is a successful wireless connection. If the LED |
| is flashing, the Router is actively sending or receiving data over the network. |
Phone1/Phone2 Blue. This LED lights up blue when a SIM card is correctly installed and registered. It will blink when you have new voicemail.
Internet | Green. The Internet LED lights up when there is a connection made through the Internet port. |
| The LED flashes when there is traffic. |
Pairing | Green. The LED lights up green when wireless security is enabled. When the Pairing button is |
| pushed, the Pairing LED flashes amber, then when the pairing is done, the LED lights up green. |
Chapter 3: Getting to Know the | 7 |
The Front Panel
