Linksys WRTU54G-TM manual SIM Card Installation, Direction Holder

Wireless-G Broadband Router with 2 Phone Ports

SIM Card Installation

Two SIM cards are required for a 2-line configuration.

To install a SIM card, follow these steps:

1. Slide the SIM card cover down, then lift off.

1

2. Gently slide up the SIM card holder. Then from the bottom side, carefully lift up the SIM card holder. Do not lift the holder until it is correctly in place or it could break.

Figure 4-11: Slide Down the SIM Card Cover

3.Position the SIM card with the gold metal side up and towards the card slot opening. Carefully insert the SIM card into the slot until it lines up with the bottom edge of the top piece of the holder and before it hits the bottom piece of the holder or the SIM card or holder could break.

4.Fold down the SIM card holder and slide down into place.

5. Replace the SIM card cover. You might need to push it hard to lock it in place. Bottom Side

Bottom Piece of Holder

Slide SIM in only this far and not to the bottom

3

2

Slide up SIM card holder this	Top Piece of
direction	Holder

Figure 4-12: Slide and Lift SIM Card Holder and Insert SIM Card

4

	Figure 4-13: Fold Down the SIM Card Holder and Slide into
	Place
Chapter 4: Connecting the Wireless-G Broadband Router with 2 Phone Ports	13

SIM Card Installation