LIGHTING INSTRUCTIONS

1.STOP! Read the safety information.

2.Set the Temperature Set Point function of the Command Display to the lowest setting.

3.Turn Off all electrical power to the appliance.

4.This appliance is equipped with an ignition device, which automatically lights the burner. DO NOT try to light the burner by hand.

5.Turn the main manual gas cock handle clockwise to the “OFF” position.

TURN TO OFF POSITION

FIG. 74 Gas Cock with Handle in “OFF” position

6.Wait five (5) minutes to clear out any gas. If you smell gas, STOP! Follow “B” in the safety information. If you don’t smell gas go on to the next step.

7.Turn the main manual gas cock handle counterclockwise to the “ON” position.

8.Turn on all electric power to the appliance.

9.Set the Temperature Set Point function of the Command Display to the desired setting.

10.If the appliance will not operate, follow the

instructions “To Turn Off Gas To Appliance” and call your service technician or gas supplier.

TO TURN OFF GAS TO APPLIANCE

1.Set the Temperature Set Point function of the Command Display to the lowest setting.

2.Turn off all electric power to the appliance if service is to be performed.

3.Turn the main manual gas cock handle clockwise to the “OFF” position.

WARNING￿

Should overheating occur or the gas fails to shut off, turn off the manual gas control valve to the appliance.

IGNITION SYSTEM CHECKOUT

1.Set run/stop switch to “STOP” position.

2.Set the Temperature Set Point function on the Command Display and high limit controls to the highest setting.

3.Turn electric power on.

4.Set run/stop switch to “RUN” position.

5.Allow bypass to synchronize and safety switches to prove.

6.The igniter will cycle on trial for ignition.

TURN TO ON POSITION

FIG. 75 Gas Cock with Handle in “ON” position

7.The ignition module will lock out and indicate a flame failure through the appropriate flash code.

8.Readjust Temperature Set Point of the Command Display and high limit to normal settings.

9.Turn on gas supply.

10.Push the reset button to the right of the ignition module on the front control panel to reset ignition module.

11.If ignition system fails to operate properly, repair work must be performed by a qualified serviceman or installer.

56

Page 55 Page 57
Page 56
Image 56
Lochinvar 1, 000 through 2 warranty To Turn OFF GAS to Appliance, Ignition System Checkout
Page 55 Page 57

000, 000 through 2, 1 specifications

Lochinvar 1 is a remarkable achievement in the realm of modern technology and engineering. As a powerful and efficient water heater, it has been designed to cater to a wide range of residential and commercial needs. One of the standout features of Lochinvar 1 is its advanced heating technology, which incorporates a high-efficiency condensing design. This technology allows the unit to achieve impressive energy savings by maximizing heat transfer while minimizing energy consumption.

The Lochinvar 1 utilizes a stainless steel heat exchanger that enhances durability and corrosion resistance. This not only extends the lifespan of the unit but also ensures consistent performance over time. Coupled with a user-friendly control system, users can easily adjust settings and monitor performance, enhancing overall convenience and usability.

Another key characteristic of the Lochinvar 1 is its compact design, making it suitable for a variety of installation environments. Whether in a residential basement or a commercial utility room, the unit’s space-saving configuration allows for efficient use of available area without compromising on capability.

Safety features are integral to the Lochinvar 1, providing peace of mind for users. The unit is equipped with advanced monitoring systems that can detect irregularities and automatically shut down the system if necessary. This not only protects the equipment but also enhances the safety of the environment in which it operates.

In terms of performance, Lochinvar 1 boasts a high recovery rate, ensuring hot water is available on demand. This is particularly beneficial for settings with high water usage, allowing simultaneous operations without lag.

Moreover, the unit supports various venting options, offering flexibility during installation. Whether using traditional vertical venting or innovations like direct venting, Lochinvar 1 accommodates different building designs and local codes, making it highly versatile.

In conclusion, Lochinvar 1 epitomizes the melding of efficiency, reliability, and user-friendly technology. With its high-performance features, robust safety systems, and adaptable installation options, it stands out as a forefront player in the water heating industry, meeting the diverse needs of today's consumers and businesses alike.
Top Page Image Contents