1 8 Installation (For Qualified Installers Only)
Installation Example:
Vertical Cap | Cover Plate |
Storm Collar
Silicone
Seal the cover plate with silicone.
“L” Vent
.RTV °F 500Silicone
Seal each vent section (including adapters, elbows, etc...) by injecting a liberal amount of 500° F. RTV silicone into the gap between sections.
“L” Vent Flex
Section
Allow room for the hopper lid to open
44”
6” Min.
NOTE: you may need a short horizontal section here to clear the lintel and allow the hopper lid to open.
Travis Industries | 4061016 | 1 0 0 - 0 1 1 8 4 |