3 2Maintenance
Sweep Ash Into Ashpan
WARNING: Make sure the heater has fully cooled (approximately 25 minutes) before conducting service.
Remove the two ashdump covers on the floor of the firebox using the included hook tool. Remove the firepot and place it aside. Sweep accumulated flyash through the holes in the firebox floor into the ashpan. Replace the covers and firepot after cleaning.
Use the included hook tool to remove the ashdump covers (both side).
Lift the firepot out of the firebox.
Use the included brush to sweep all flyash into the ashpan.
Make sure to sweep flyash from the firepot holder.
Travis Industries | 4061016 | 1 0 0 - 0 1 1 8 4 |
