Lorex ECO2 SERIES LH130 Ninth, Apply, Output, Enable, Single, Display, Quarter, Spot-Out, Spot Sequence, To configure the Spot monitor to show channels in split-screen:

Appendix C: Connecting Additional External Monitors

Configuring the Spot Monitor for Full-Screen or Split-Screen (16-Channel Models Only)

By default, a monitor connected to the Spot port automatically shows channels in Sequence View.

To configure the Spot monitor to show channels in split-screen:

1Right-click to open the Menu Bar and click the Main Menu button ().

2Click Display and select the Output tab.

3Under Video Output, select Spot-Outto configure settings for the monitor connected to Spot.

Select Spot-Out

Select Enable

Click Spot Sequence

4Under View Setup, select Enable. This lets you select and arrange the channels you want to show on the screen.

5Under View Mode, select Single to show 1 channel in full-screen, Quarter to show 4-channels in split-screen, or Ninth to show 9-channels in split-screen.

6Click Spot Sequence. A menu appears that allows you to select the arrangement of channels you would like to show on the Spot monitor.

7Click the drop-down menus to select which channels you would like to show on the screen and the arrangement of channels.

Select the channels that will be shown on the screen and the arrangement of channels

8Click Apply to save changes. Click Ok. Right-click repeatedly to exit all menus and return to live viewing.

110