Remote Viewing Interface

2Configure the following:

•Channel: Select the channel you want to modify.

•Name: Enter the channel name if you want to re-name the channel

•Position: Select the position of where the title appears in the channel.

•Covert: Enable or Disable covert recording. Covert recording will hide the channel on the DVR’s local display. You will see be able to see the channel when you log in remotely.

•Show Time: Select Enable or Disable to show or hide the time on the DVR’s local display.

•Record Time: Select Enable or Disable to show or hide the record time on the remote display.

3Click Save to apply your settings.

Configuring Privacy Zone Settings

ATTENTION: Areas covered by privacy zones are not visible in recordings.

You can blank out a certain portion of the channel with a black box.

To configure a privacy zone:

1Click the Remote Setting tab, and then click Display>Privacy Zone

2In the Channel drop-down menu, select the channel you wish to configure.

3Select the Privacy Zone checkbox to enable privacy masking.

4Drag your mouse cursor over the areas you wish to black out. A red box indicates the area that is masked (blocked out).

Drag mouse over desired area

• To remove a privacy area, click on the red box, then click the Delete button.

5Click Save to apply your settings.

72