Lorex ECO2 SERIES LH130 To control the PTZ settings on the DVR:

Remote Viewing Interface

Configuring PTZ Settings

The system supports remote PTZ controls for compatible PTZ cameras (not included).

•For details on connecting PTZ cameras to your system, see “Appendix B: Connecting a PTZ Camera” on page 106.

To control the PTZ settings on the DVR:

1From the Live tab, double-click to select the channel the PTZ camera is connected to.

2Use the PTZ control panel to control the pan, tilt, zoom, focus, and iris control of the camera.

Zoom,Focus,andIris

Direction keys:settings Click to pan and

tilt the camera

On-screen PTZ Controls:

Click the button to enable / disable on-screen PTZ controls. Click inside the display area to pan and tilt the camera

Preset:

Use the Preset tab to configure camera presets. Once your PTZ camera is in the desired angle, press the + button to add the setting to the Preset

Speed Slider: Increase or decrease the pan and tilt speed

Cruise:

Use the Cruise tab to

add desired PTZ cruise options

Video Tab:

Use the Video tab to configure the

PTZ camera’s video quality.

Drag the slider to adjust settings

69

Contents

DIGITAL VIDEO SURVEILLANCE RECORDER Page Online: By Phone: ¿NECESITA AYUDA En línea: Por teléfono: BESOIN D’ASSISTANCE En ligne : THIS PRODUCT MAY REQUIRE PROFESSIONAL INSTALLATION www.lorextechnology.com/installation www.lorextechnology.com Important Safeguards General Precautions Read and Follow Instructions Retain Instructions Heed Warnings Ventilation Attachments Water and Moisture Heat Accessories FCC/IC Notice: Modification: RoHS: Product Information Specification Sheets Features Digital Video Recorder Features Connectivity Features2 TABLE OF CONTENTS Page Page Mobile Apps: Accessing your DVR Using a Mobile Device BlackBerry Windows Mobile Symbian OS Appendix C: Connecting Additional External Monitors Page Getting Started Front Panel 3Channel Controls for full screen view: Ch1/5 1/5 CH 2/6 2/6 Ch1 ~ Ch9 Rear Panel Video Input Audio Out Audio In BNC Video IN Video Out Basic Setup Page admin remotely ALL Local DVR user name and password: ADMIN ATTENTION Installation Tips Installing Cameras Connecting BNC Cameras to your DVR Connecting and Removing BNC Cables To connect or remove a BNC connector: Mouse Control Remote Control Number Keys (1-9) MENU Navigation Cursors REC: SEARCH (1-0) Display Mode 2x2 / 3x3 Using the On-ScreenDisplay Tip: If you can’t see your mouse cursor on screen (16-channelmodel only): To access the Menu Bar: Menu Bar Icons Main Menu Lock Split Screen buttons To use the Virtual Keyboard: Shift Enter ESC To use the Virtual Mini-Keyboard: To use the Zoom Mode: To use Picture in Picture Mode: Setting the Date and Time Configuring Daylight Savings Time (DST) To enable automatic DST adjustments: DST Setup •Daylight Saving Time: Select Enable Time Offset Using a NTP Server to set your System Time To enable NTP: System •Enable: Select Enable Server Address Recording Playback and Backup To search for recorded footage on the DVR: Search Using the On-ScreenPlayback Controls Mute To back up video: Backup Search Time BAK To install the AVI converter: AVI Generator To start the AVI Generator: Save As Managing Passwords Password Enable Password Confirm To add a new user: Permission User Enable: Disable Using the Main Menu Tip: Configuring Custom Channel Names Live Channel Name Covert Configuring the Time and Recording Time Display To add/remove the time stamp in the system display: Configuring Sequence Time Adjusting Menu Transparency To adjust the transparency of on-screenmenus: Transparency Adjusting the Video Margin To adjust the video margin: Area Setup Area1~4 Configuring Pre-recordingSettings Rec Para PreRecord Configuring the Recording Schedule (Continuous, Motion Alarm) To configure the recording schedule: Schedule Quality Good, Better Best C1F HD1 Video Playback Controls Backing up Video Files To back up video files: Using the Event Search To perform an Event Search: 1Click the Event Search tab Play video Back up a file Using the Log Search Configuring Network Type: DHCP & Static IP To configure DHCP and Static IP settings: Type DHCP Static HTTP Port Adjusting Remote Connectivity Streaming Rates To adjust the SubStream settings: SubStream FPS: Receiver Email Interval If you select "Enable", and want to use your own email server: SSL ON/OFF To configure DDNS settings: DDNS •DDNS: Select Enable Server LOREXDDNS Sensitivity: Alarm Out: Latch Time: ShowMessage: Buzzer: Configuring Hard Drive settings To format the hard drive: all data This step cannot be undone 3Click Format HDD Changing Date Format To change the date format: General Date Format YY/MM/DD Configuring the "Auto Reboot" feature To enable the Auto Reboot feature: Maintain Auto Reboot: Reboot: Restoring to Factory Default Settings To load system defaults: Load Default Restarting or Shutting Down the To configure system warnings: Events Event Type DiskNoSpace Disk Error Setting up your DVR for Remote Connectivity Step 1 of 3: Connect your DVR to the Local Area Network INTERNET Step 2 of 3: Obtain the DVR’s Local IP Address and HTTP Port Example (Connecting to a Local IP Address using Internet Explorer): Example (Connecting to a Local IP Address using Safari): SurveillanceClient.dmg Open SurveillanceClient Quit To set up remote connectivity with your DVR, you must: Step 2 of 4: Create a DDNS Account You must create a DDNS account in the same network as your DVR To setup your free Lorex DDNS account: Step Warranties Activate Warranty Enter a New Address Create Address Save Warranty Set Up a New DDNS Product Warranty: Device Name: MAC Address: URL Request: Save Step 3 of 4: Enable DDNS on the DVR To enable DDNS in your DVR: Domain name/URL Request DDNS User Name DDNS Device password http://tomsmith.lorexddns.net:80 admin Lorex Client 11: Client Software for PC Remote Viewing Interface 3Viewing options: Split screen viewing Main Screen PTZ Controls To log in to the DVR: To change the DVR’s viewing mode: To take a screen shot of a channel: Preview Folder If you receive an error taking a screen shot: To record video: To show or hide video in the main video window: To open the sub-menu: Show Bit rate Original Proportions Local Setting File Type avi To control the PTZ settings on the DVR: To playback video: Synchronous playback Video Playback Controls Step Forward Video Slider Download Content Start Download Show Time Record Time 1Click the Remote Setting tab, and then click Display>Privacy Zone Delete To configure system recording parameters: 1Click the Remote Setting tab, and then click Record>Rec Parameters Pre-record 1Click the Remote Setting tab, and then click Record>Schedule Week: Copy Copy To 1Click the Remote Setting tab, and click Record>MainStream Resolution FPS (Framerate To configure basic network settings: Network DHCP Static AutoPortForwarding FPS (Framerate) Bit Rate To configure email notification settings: 1Click the Remote Setting tab, and click Network> Email Custom SSL ON/OFF Interval: To change the mobile user name and password: 1Click the Remote Setting tab, and click Network>Mobile DDNS •DDNS: Select Enable or Disable User name DDNSDevicepassword 1Click the Remote Setting, and click Alarm>Motion Full Screen Enable Record Post Recording To configure the system to "beep" during motion: 1Click the Remote Setting tab, and click Alarm>Motion Remote Setting tab>Record>Schedule To configure alarm notifications: 1Click the Remote Setting tab, and click Alarm >Alarm Alarm In Alarm Type To configure the hard drive recording mode: 1Click the Remote Setting tab, and click Device>HDD To configure PTZ settings: 1Click the Remote Setting tab, and click Device>PTZ Protocol Baud Rate Data Bit Stop Bit Parity To configure the user accounts menu: 1Click the Remote Setting tab, and click System>Users Active To view system information: System>Info 2Click the Remote Setting tab, and click Advanced>Firmware upgrade Upgrade File Path To restore the system’s system defaults: 1Click the Remote Setting tab, and click Advanced>Load Default To configure the system event settings: 1Click the Remote Setting tab, and click Advanced>Events Event Type To configure Auto Maintain: 1Click the Remote Setting tab, and click Advance>Maintain Auto Reboot Reboot Lorex Player 11: Playing Backed up Video on PC About the Advanced Config menu To open the Advanced Config menu: Lorex Player for Mac: Viewing Backed up Video on Mac Loading Individual Video Files To load files saved onto your hard drive: Loading Multiple Video Files To load multiple video files saved onto your hard drive: Mobile Apps: Accessing your DVR Using a Mobile Device System requirements You must port forward the mobileport(default:1025)on your router before you can connect to your system using a mobile device Step 1 of 3: Downloading the App Free Device Name User ID MaxChannel Back Step 3 of 3: Connecting to your DVR TIP: Deleting Accounts Taking Snapshots To take snapshots: Changing Channels Interface Overview Add Device Channel List 3Pan & Tilt camera (PTZ only) You must port forward the mobile port (default: 1025) a mobile device (e.g Step 1 of 2: Downloading the App Step 2 of 2: Configuring and Connecting to Lorex Mobile Eco Viewing Controls Prerequisites: APN Step 1 of 2: Downloading and Installing the App Applications 6Click Import Files alx Step 2 of 2: Configuring Lorex Mobile Eco Title No. of CHs: Controls To enable APN: Options 2Select Advanced Options > TCP/IP APN Settings Example You must port forward the mobile port (default: 1025) onyourrouter beforeyoucan connect to your system using amobiledevice Setting Auto Connect onyourrouter beforeyoucan connect to your system using a mobile device Alias Appendix A: System Specifications Appendix B: Connecting a PTZ Camera •Protocol: Select from Pelco-D or Pelco-P Baud 5~8 •Parity: Select from None, Odd, Even, Mark or Space To control the PTZ camera locally on your DVR: Setting PTZ Presets Set Selecting PTZ Presets No Go to Appendix C: Connecting Additional External Monitors BNC to RCA adapter Main Spot Main To configure the Spot monitor to show channels in split-screen: Spot-Out Single Quarter Ninth Appendix D: Recording Audio Connecting Audio Cameras 4/8-ChannelModels Connecting Audio Cameras 16-ChannelModels model only Appendix E: Replacing the Hard Drive To replace the hard drive: To format the hard disk: 4Click Format HDD Troubleshooting Page Page Page Page www.lorextechnology.com