Remote Viewing Interface

2Configure the following:

•Channel: Select the channel that the PTZ camera connects to.

•Protocol: Select the protocol of the PTZ camera*.

•Baud Rate: Select the baude rate of the PTZ camera*.

•Data Bit: Select the data bit rate of the PTZ camera*.

•Stop Bit: Select the stop bit rate of the PTZ camera*.

•Parity: Select the parity settings of the PTZ camera*.

•Cruise: Select Enable or Disable*.

•Address: Select the address of the PTZ camera*.

*Consult the PTZ camera’s instruction manual for protocol and configuration details

3Click Save to apply your settings.

Configuring the System Time and Date

To configure the system time and date:1Click the Remote Setting tab, and click System>General.

2Configure the system format and time:

•System Time: Enter the desired system time and date. An on-screen calendar appears when you click the date.

•Date Format: Select the desired format the date is displayed in.

•Time Format: Select between 12 hour or 24 hour time formats.

3Select DST to enable daylight savings time, or NTP to sync the time with a NTP time server. NOTE: Using the NTP feature requires that your DVR have a constant Internet connection.

Changing the System’s Menu Time Out

To change the system’s time out menu:

1Click the Remote Setting tab, and click System>General.

2In the Menu Timeout drop-down menu, select the duration the menu stays on screen before disappearing.

3Click Save to apply your changes.

82