Lorex ECO2 SERIES LH130 FPS:, Apply, NOTE:, Audio, Apply, Email, Email, Email, Enable, Bitrate, Default, Disable, Default, HTTP Port, SubStream, Sender Email

Using the Main Menu

3In HTTP Port, enter the desired HTTP Port (default: 80).

4Click Apply to save your settings.

5Right-click to exit all menus. You will be prompted to restart.

Adjusting Remote Connectivity Streaming Rates

You can adjust the data streaming rate (also called the SubStream) when you connect to the system remotely. If you want to conserve bandwidth, select a lower frame rate and bitrate.

NOTE: Settingyoursystemtostreamwitha lower frame and bitrate may cause the video to appear choppy or slow.

To adjust the SubStream settings:

1Click the SubStream tab.

2Configure the following beside the desired channel:

•Video: Select Enabled or Disabled. If you selectDisabled,youwillnotbeabletoview the channel when connecting remotely to the system.

•FPS: Select the desired frames per second.

•Bitrate: Select the desired video bitrate.

•Audio: Select or deselect the checkbox to enable or disable the system from streamingaudiowhenviewingthesystem remotely.

3Click Apply to save your settings.

Setting up Email Notification

Thesystemcansendemailnotifications when it detects motion or when an alarm parameter triggers.

To set up email notification:

1Click the Email tab in the Network menu.

2From the Email drop-down menu, select from:

•Default: Uses the Lorex email server to send out alarm notifications. This is the recommended selection.

•Enable: Uses custom email server settings.

•Disable: Disables email notification.

If you want to use Lorex’s email server (recommended):

1In the Email drop-down menu, select Default.

Select Default

2In the Sender Email field, enter the email address of the sender. This can be any email address of your choice.

42