Lorex ECO2 SERIES LH130 Apply, Events, Enable, Enable, Buzzer, Disable, Alarm Out, Event Type, Disk Error, Video Loss, Send Email, Latch Time, DiskNoSpace, Show Message

Using the Main Menu

To configure system warnings:

1Click the Events tab.

2Configure the following:

•Event Type: Select the event that triggers the system to send out a notification or alarmtrigger.ChoosefromDiskNoSpace (low hard drive space), Disk Error (hard drive error), or Video Loss.

•Enable: Select Enable or Disable to activate or deactivate the system from sending out notifications.

•Alarm Out: Select the checkbox to enable alarm out devices from triggering.

•Show Message: Select the checkbox for the system to display an error message when an event occurs.

•Send Email: Select the checkbox for the system to send out email notifications when a system error occurs. Note, email notifications must be configured.

•Latch Time: Select the delay duration in the drop-down menu.

•Buzzer: Select the buzzer (system beep) duration when the system detects a system error.

3Click Apply to save your settings.

50