Remote Viewing Interface

system record motion events, enable motion recording in the recording calendar (Remote Setting tab>Record>Schedule).

Configuring Alarm Notifications

Configure the settings for alarm devices (not included).

To configure alarm notifications:1Click the Remote Setting tab, and click Alarm >Alarm.

2Configure the following:

•Alarm In: Select the channel that you wish to configure.

•Alarm Type: Select the alarm type N/O (normally open), N/C (normally closed), of select OFF.

•Buzzer: Select the "beep" duration when an event occurs.

•Latch Time: Select the desired latch time when an alarm triggers.

•Show Message: Select the checkbox so that the system displays a warning message during an alarm recording.

•Send email: Select the checkbox for the system to send out email alerts during an alarm recording.

•Full Screen: Select the checkbox to enable the system to go into Full-screen View when an alarm triggers.

•Alarm out: Select the checkbox to enable alarm out devices to activate.

•Enable Record: Select the checkbox to enable system recording when an alarm triggers.

•Post Recording: Select the desired post recording time after an alarm triggers.

•Record Channel: Select the channels that the system should record during an alarm trigger.

3Click Save to apply your settings.

80