16-Channel

1

2

3

4

5

1IR Sensor: IR receiver for the remote control. LED Indicators:

•PWR: Power LED.

•HDD: Hard disk activity LED.

2Menu & Playback Controls:

•: In Playback Mode, press to rewind. Press repeatedly to increase rewind speed.

•: In Playback Mode, press to play / pause video.

•In Viewing mode, press to open Search Menu to select playback time.

•: In Playback Mode, press to fast forward. Press repeatedly to increase fast forward speed.

•: In Playback Mode, press to stop video playback.

•In Live Viewing Mode, press to stop DVR recording. Password required; does not override scheduled recording.

•Press and hold for 15 seconds to reset the DVR to the default resolution. DVR will reboot. This does not work if the monitor is connected using HDMI.

•: Press to stop / resume recording. When the channel displays a red box with the letter "C", the channel is recording.

•Menu / Esc: Opens the system menu. In menus, press to go back / exit menus.

3Channel Controls:

•Ch1 ~ Ch9: Press to view channel in Full-screen View.

•To access channels 10 and greater: Press 0 for channel 10 or 1+0 for channel 10, 1+1 for channel 11, 1+2 for channel 12, etc.

•: In Live Viewing Mode, press repeatedly to switch between Split-screen Viewing modes.

4Navigation Buttons:

•: Press to move cursor up.

•: Press to move cursor down.

•: Press to move cursor left.

•:Press to move cursor right.

5PTZ/ : Within system menus: Press to confirm a selection.

•In Live Viewing Mode, press to open the System Information window.

•In Live Viewing Mode, press and hold for 6 seconds to open the PTZ menu.

4