Recording
Manual Recording
Manual Recording allows you to manually start/stop recording from one channel at a time. You cannot record while in Quad mode.
You can also record while in Zoom mode. For details on using Zoom, see “Zoom” on page 52.
NOTE: You cannot change channels or enable Auto Sequence Viewing Mode during Manual Recording.
REC
Cam1
2009 07 17 16:32:05
Figure 7.0 Recording indicated by the OSD
To enable Manual Recording:
1.Select a channel (1~4) on the wireless receiver or from the remote control.
2.Press the Record— button.
3.To stop Manual Recording, press the Record—
button again. “NEW” will appear on the LCD receiver indicating a new file is on the SD card.
When Should I Use Manual Recording?
•Emergency recording
•Low traffic environments
27
