Appendix C: Adding Cameras
Appendix C: Adding Cameras
The system comes with cameras that have already been paired to the LCD receiver. The Pairing Function assigns each camera to a different channel on the wireless receiver (up to four cameras), and is necessary for configuring additional cameras. By default, the cameras included with the system appear as camera 1 and camera 2 on the LCD receiver.
NOTE: It is highly recommended to pair the cameras to the receiver before permanently mounting the cameras.
To pair an additional camera:
1.Connect the new camera to a power outlet. DO NOT permanently mount the camera.
2.Press MENU on the wireless receiver or remote control.
3.From the Main Menu, select Pairing and press the Enter button.
4.Select Camera 3, or Camera 4 and press the Enter button.
NOTE: By default, the cameras included with your system are paired as Camera 1 (channel 1) and Camera 2 (channel 2).
5.Following the
NOTE: If you do press the Pair button on the camera during the 30 second pairing window, repeat steps 2~5 to try the pairing process again.
Once the camera is paired you can permanently mount the camera to a desired location.
Figure 15.0 Pairing menu
Cam2
Please Press
Pair Key on Camera side 30
Figure 15.1 Pairing screen
At the pairing screen, you have 30 seconds to press the PAIR button on the rear panel of the camera.
Figure 15.2 Press “Pair” on the back of the camera
57
