Using the Intercom

Using the Intercom

Use the Intercom feature for two-way communication between the LCD receiver and the camera. Talk the person at the camera from behind closed doors for added security.

NOTE: Please make sure the camera(s) is properly connected prior to using the Intercom.

To use the Intercom:

1.Press and hold the TALK button on the back of the LCD receiver. An audio icon appears on-screen.

2.Talk in a normal speaking voice close to the LCD screen (approximately 12 in. / 30 cm).

3.Release the TALK button to hear a response from the camera(s).

Figure 9.0 Press and hold the “Talk” button and then speak into the LCD receiver; release the “Talk” button to listen

Two-Way Audio Volume

The two-way audio volume is different from the alarm/buzzer volume found in the Main Menu (Main Menu>Settings>Alarm Volume). Use the volume buttons on the remote control to change the volume for two-way audio.

To change two-way audio volume:

1.From live viewing, press the Vol+ button to increase system volume.

2.Press the Vol- button to decrease system volume.

Use the white volume icons on the on-screen display to help you set the volume for two-way audio.

SD

Cam1

36

Page 40
Image 40
LOREX Technology LW2702 instruction manual Using the Intercom, Two-Way Audio Volume