LOREX Technology LW2702 Camera 1 On Camera 2 Off Camera 3 Off Camera 4 Off, Camera On/Off

Using the Main Menu

Camera On/Off

Use the Camera On/Off menu to show/hide camera channels on the main display screen. For example, if you disable camera 3, it will not appear in single channel full-screen, or in Quad mode.

NOTE: If a power failure occurs on your system, you may need to re-configure your Camera

On/Off settings. For more details, see “Appendix G: Power Failure” on page 62.

Camera 1 On

Camera 2 Off

Camera 3 Off

Camera 4 Off

Figure 11.0 Camera On/Off menu

Make sure cameras are properly connected and paired to the receiver before disabling. To enable/disable cameras:

1.From the Main Menu, select Camera On/Off and press the Enter button.

2.Select the desired camera and press RIGHT/LEFT to select On or Off.

NOTE: The currently selected camera will have On/Off highlighted in RED.

3.Press the Enter button.

4.Press the MENU button to exit.

NOTE: Any disabled channels will be blacked out in Quad mode.

38