Use T-connector or double T connector to add

Backbone cable

device to bus (maintaining linear architecture)

to rest of bus

Attach terminator at end of bus

Existing network node

Devices connect to double T connector

In this example, a new device is added to the NMEA 2000 bus by

installing a T connector between a T connector and a terminator at the

end of the backbone (network bus).

Additional Network Information

For more information on creating or expanding a network refer to the NMEA 2000 network setup booklet, part number 988-0154-173, which came packed with this document.

7

Page 7
Image 7
Lowrance electronic EP-60R installation instructions Additional Network Information