1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press ENTER.
2.Highlight BUS DEVICES and press ENTER. The Bus Devices list will appear.
Bus Devices highlighted in the System Setup menu (left). Searching
Bus Devices window (center) with Bus Devices list (right).
3.Select UNCFG F FLOW and press ENTER. The following message will appear: Press Enter to Configure Fuel Flow Snsr.
4.Press ENTER. If your unit is configured for more than one tank, the Select Engine menu will appear. (If your unit is set to a
5.Select the desired engine and press ENTER. You will be directed to the Bus Devices list. Press EXIT repeatedly to return to the main display.
To unconfigure a fuel flow:
You will use the Unset Engine command to unconfigure a fuel flow.
To unset engine:
1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press ENTER.
2.Highlight BUS DEVICES and press ENTER to open the Bus Devices list.
3.Select the desired fuel flow and press ENTER. The Fuel Flow menu will appear. Select UNSET ENGINE and press ENTER. The following message will appear: Press Enter to UnConfig Device Name.
4.Press ENTER and you will be directed back to the Bus Devices list, where the fuel flow you unconfigured will be shown as UnCfg F Flow.
To reconfigure a fuel flow:
You will use the Change Engine command to reconfigure a Fuel Flow. Change Engine, however, will only appear on the
23
